Beurer Ft-09 Thermometer

Product Description:

Fever measurement made easy! The clinical thermometer with contact-measurement technology is easy to use and waterproof.

Contact-measurement technology.

Display in °C.

Waterproof.

No mercury, without glass.

Can be disinfected.

1 memory space.

Automatic switch-off.

Acoustic signal when measurement is complete.

Medical device.

With protective cap.

Usage:

First remove the protective foil from the display. For switching on, briefly press the on/off key.

A short acoustic signal will announce that the thermometer is switched on.

The thermometer will carry out a self-test for about 2 seconds.

During the selftest all segments of the display will appear.

Then the reference reading (37°C) appears.

Then the measurement symbol “°C” flashes and “Lo” is shown on the display.

The thermometer is now ready for use.

During the measurement, the current temperature is displayed continuously, and the “°C” symbol flashes on and off.

The measurement is completed when a stable temperature has been reached.

When this stage has been reached, an acoustic signal is heard, the “°C” symbol stops flashing and the temperature measured is displayed. As long as the measured temperature is below 32 °C, “Lo °C” will appear.

Higher temperatures will be shown directly, e.g. 32,1 °C. By prolonging the length of measurement until after the acoustic signal, more accurate measurements can be obtained.

In case the temperature is measured in the armpit, the thermometer should be left in the armpit for the recommended time of measurement, in spite of the acoustic signal.

If temperatures over 37,8 °C are measured, a fever alarm sounds short bleeping tones, 10 seconds long). If temperatures higher than 42,9°C are measured, the symbol for “Hi °C” will appear.

To prolong the life of the battery, please switch off the thermometer by briefly pressing the on/off key after the measurement.

Otherwise the thermometer will automatically switch off after 10 minutes.